EPE foaming machine of the main several parts you know what are?  However, you know how to maintain EPE Foam Sheet Extrusion Machine?

 

Today by me Take you to understand! let go~

Gearbox 

• Before using this machine, please check the gearbox for oil. 
• Fill with N150 or N220 medium duty industrial gear oil. 
• Make sure the oil level is above the centerline of the oil mark during operation. 
• Change the gear oil after the first 500 hours of use and every 3000 hours thereafter. 
• When changing the gear oil, the case, oil filter and air filter should be cleaned. 

MOTORS 

• Permanent magnet water-cooled motors should be kept free of circulating water and should not be operated without water. 
• Regularly add high temperature grease (350 degrees) to the motor bearings. 
• Whether the fixing screws of the base are loosened or not 
• Regularly check whether the coupling level is shifted or not. 

Electrical cabinet 

• Clean the dust inside the cabinet after each shutdown and keep the cabinet ventilated and sanitary. 
• Monthly check whether the connecting wires are loose  Monthly check whether the electrical appliances are aging. 

Screw 

• This machine is not allowed to empty (no material in the cylinder), it is strictly prohibited to carry out the temperature is not in place, so as not to damage the screw. 
• Regularly clean the screw cooling section scale (try to use tap water) 
• Every 3 months to check the mechanical level, whether the main machine corner screws loose displacement 

Others 

• Mechanical transmission: refuel the chain every three months, refuel the gears every month. 
• Every time you stop the machine, check whether the outer line/bottom line is broken or damaged, and replace it immediately if it is damaged. 
• Mechanical pneumatic components need to be refilled with pneumatic parts lubricant 
• Monthly check for lack of oil at the plunger rod of monoglyceride and butane pumps. 
• Monthly check for loose and worn gear set screws